Woodcut MillDrill

82,60 incl. VAT

Out of stock

SKU: Woodcut MillDrill Category:

Description

Woodcut MillDrill

The Woodcut MillDrill is designed to drill the hole (with different diameters) for the grinders of Crushgrind in 1 movement. The production of pepper and salt mills becomes more precise, faster and easier in this way. The 2 HSS chisels on the side of the head are adjustable so that the drill can also be used for other purposes. And a 10 mm drill bit can be mounted in the front of the DrillMill, so that the most commonly used Forstner drills can be fitted. Useful!

The drill has a Morse taper 2 chuck and therefore fits in most lathes. The 2 HSS chisels are sharpened and you can get started right away. Sharpening these chisels is best done with, for example, a CBN pin.

Do I need more?

To use this drill for the crushing grinders, you also need a 25 mm drill bit. The crushgrind grinders clamp themselves in the body of the spice grinder. To do this, a slit has to be made in the side of the drilled hole. There is a chisel available with exactly the right dimensions. You only use it for 2 secondsā€¦ These clamps can also be cut off the grinder, then the grinder can be glued into the body.