EEE-Ultrashine 250ml

17,31 incl. VAT

EEE-Ultrashine 250ml

Out of stock

SKU: EEE-Ultrashine 250ml Category: Tags: , ,

Description

EEE-Ultrashine is a polishing agent that has been specially developed for use in combination with Shellawax products, but also has a large number of applications outside of it. When used in combination with the Shellawax products, it not only gives a beautifully smooth surface, but this product also saves a lot of sanding. The way of working is as follows:
Sand the workpiece to at least grit 400
Apply some EEE-Ultrashine and process it as if it were normal
sandpaper.
The effect you achieve in one go is the same as the result you would get if you sanded manually to 2000 grit. If you sand manually to grit 1500 instead of grit 400 and then apply EEE-Ultrashine, you will achieve the same effect in one stroke as you would get with sanding to grit 4000
If the sanding work achieved in this way is satisfactory, you should preferably finish the workpiece with one of the Shellawax products to get a beautiful, lasting shine.
By using EEE-Ultrashine you achieve the following 3 effects:
The abrasive powder present in the paste will, as it were, abrade the tops of the mountains of the 400 grit sanding scratches (or the finer grit you last used). So this is the same effect as you would get by finer sanding by hand.
During sanding, a kind of “slurry” is created which is a mix of the EEE-Ultrashine ingredients and the sanding dust made in point 1. This “slurry” automatically ends up in the pores, so that the valleys of the sanding scratches are also filled. Besides that, as described in point 1, the tops of the mountains are also removed, the valleys in between are also filled. This effect is the effect that is achieved in the traditional polishing process by means of ā€œpummingā€.
The last effect that you achieve with EEE-Ultrashine is that the workpiece starts to shine a bit due to the presence of a little wax in the paste. The shine in itself is not important during preparation, but the effect of this is that if there are still scratches in the workpiece that you had not noticed before, they will now at least become visible so that you can still see them. before applying the actual finishing coat. So no surprises afterwards!
Except for preparing wooden workpieces for a
Shellawax finish, EEE-Ultrashine can also be used for:

Polishing plastic lathes (for example pens). In that case, EEE-Ultrashine forms the final finish and no additional treatment is required.

Polishing (turning of) bone.

Polishing (turning) stone.

polishing shells.

Polishing various metals.

Polishing Tagua nuts.

Cleaning all kinds of dirty plastics such as Trespa, plastic windows, caravans, polyester, fascia boards and the like.

Polishing varnish and other lacquer finishes.

Optimizing polishing work.

In all cases, first try out a piece in an inconspicuous place to see if your application indeed gives the desired result!

Additional information

Plating

Goud, Chrome, Gun metaal

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.